East Coast Customs
Phone (07) 3265 4880Fax (07) 3865 4883

Parts (JDM)


ECU’s (both aftermarket and remapped), electronic boost controllers, gauges, sensors, turbo timers, ignition systems – if it’s electronic, and it helps your car in any way possible – the team at East Coast Customs can source it AND install it for you!

Electronics Apexi JDM

The team at East Coast Customs can,and regularly install and tune, the following computers for JDM imports:

  • Power Fc
  • Nistune
  • Link
  • Vipec
  • Haltech
  • Adaptronic
  • Emanage
  • Autronic
  • Microtech
  • plus many more…

Electronics GREDDY JDM

East Coast Customs also have extensive experience in tuning and installing all other forms of electronics devices

  • Electronic boost controllers
  • Turbo timers
  • Piggybacks
  • Gauges
  • Ignition amplifiers
  • Coils and leads
  • Switches and relays

Guages 2 JDM

Basically, if an import can use it, we have used it, tested it, and can supply, fit, install or simply advise you on the how and why each product will suit your vehicle.

Guages 1 JDM

Call or email to enquire


Engine 1 JDMWhether it be an engine conversion, a simple recondition, or full race prep for a dedicated drift, drag or track car, East Coast Customs can not only supply everything you need to be successful, but also assemble it to exacting standards.

The East Coast Customs approach to engine building and maintenance is a simple one- not only does it have to make the power you want it to, but it has to be RELIABLE! There is no point in screwing together a big $$$ motor, if it is going to blow up in the near future or cause you nothing but dramas.

Point of note – we will not do any “slap together” rebuilds with corners cut at every turn. If this is the kind of build your chasing, we are not the workshop for you. We have a simple approach to engine building – build it right, build it once!

Engine 2 JDMThis motto means that the team at East Coast Customs not only supply the best parts available for your high performance engine, but also assemble their motors to meticulous standards, which means that your engine will not only last, but last a long time!!!

  • pistons
  • rings
  • rods
  • bearings
  • main studs
  • head studs
  • head gaskets
  • cam shafts
  • cam gears
  • pivots
  • lifters
  • rocker arm stopper kits
  • valve springs
  • crank shafts
  • stroker kits
  • oil pumps

Anything you need….. call or email to talk about your hi tech engine today!


Exhaust 1 JDMWhether it be a bolt on mild or stainless steel exhaust system, or fully custom fabricated, the team at East Coast Customs can supply, fabricate and fit the perfect exhaust system to suit your vehicle.

From minor exhaust and muffler repairs, to full race system, to remote controlled exhaust systems (yes thats right!), East Coast Customs can look after all your exhaust needs. ECC are also famous for their custom twin drift pipe setups – super noise, super flow, super cool!

Exhaust 2 JDMUnsure about whether to go for mild or stainless?

Split dump or bellmouth?

Pipes or canon?

Exhaust 3 JDMIf your unsure about what will work best for you, give us a call… We are more than happy to spend the time with you to make sure you get the right exhaust for YOU !

Call or email to enquire


East Coast Customs are official distributors for Monkey Warehouse, Adrenalin, Empire Aero, URAS, Auto Aero, ULTRA, and many more big name auto styling players!

With too many brands and styles to list, give the team a call or email to find the right look for you…


  • Carbon Fibre bonnets and accessories
  • Carbon Fibre vinyl wrapping services also available!

Cheapest in Australia !!!!!!!!!!


As seen in High Performance Imports & Hot4’s…

Great looks & proven to reduce under bonnet temps!




  • 180SX
  • S13
  • S14 series 1 & 2
  • S15
  • R32
  • R33
  • R34

East Coast Customs also has access to a full range of aero mirrors, smoked, chrome and altezza tail lights, indicators, head lights, guards, fenders, wide body conversions, front end conversions, carbon fibre bonnets and much, much more

Call or email now to find out more…

Fuel Systems

Fuel Systems 1 JDMMore air = more power
More air requires more fuel to make that extra power!

Fuel is where and how our engines make energy – and delivering this crucial liquid to our engine is a science in itself.

Fuel Systems 2 JDMLarger injectors, larger fuel pumps, in tank and external surge tank setups, aftermarket fuel pressure regulators, nitrous oxide (NOS), injector latencies and dead times, flow rates, duty cycles – it can all get a little overwhelming at the best of times!

Fuel Systems 3 JDMDon’t stress – talk to the team at East Coast Customs who can not only advise you what is required for your application, but also supply and ensure the correct fitment of this precious liquid and its associated components.

Intake & Cooling

Intake and Cooling 1 JDMIntake = getting air into your engine
More air = more power
Sounds simple doesn’t it? Whilst the exact science and knowledge behind putting this relatively simply concept into affect is substantially more complicated, at East Coast Customs it doesn’t need to be. We have done all the testing, all the research, and spent the time working out what products work, what don’t, and what works best for each application.

Intake and Cooling 2 JDMHigh flowing inlet manifolds, custom cold air induction (CAI) setups, pod filters – you name it, we can not only supply at a great price, but fit and tune it also… East Coast Customs also has a full range of engine bay dress up accessories, to ensure your engine bay looks the part – whether your chasing a neat, OEM style finish, or a fully race styled engine bay.

For more information, Call us or email to enquire

Suspension & Handling

As far as JDM suspension is concerned, if it will fit into an import, chances are the team at ECC have installed it numerous times over!

Whether it be from japanese giants such as Tein, Cusco, and HKS, locally made products such as SUPERPRO, or to alternative import brands such as HSD and DRIFTWORKS – East Coast Customs can advise, supply, and fit the parts to your vehicle

Suspension Handling 4 Drift BITZ JDMDRIFT BITZ
With the rapid and ever increasing popularity of drifting in this day and age, there are far too many different suspension tuning products to list. Whether you are chasing camber arms, toe arms, castor bars, strut braces, sway bars, control arms, cradle bushes, pineapples, braces, roll cages etc etc – backed by suspension giants such as D Project, Tein, Whiteline, Cusco, HSD, King Springs, and many many more – you name it, East Coast Customs can get it!

Suspension Handling 5 JDM

Call or email to enquire

Turbos & Accessories

Garrett GT

Turbo 1 Garrett GT JDM

We have access to the entire Garrett GT range of turbos and accessories (including the new GTX range). Call or email to enquire…




We have access to the fantastic new TOMEI ARMS range of turbos and accessories.

Possibly more experience with these turbos on our beloved SR’s than any other shop in Aus. Call or email to enquire…



We have access to Greddy’s full range of bolt on turbo kits, turbo chargers, waste gates, manifolds and accessories. Call or email to enquire…


Turbo 3 HKS JDM

We have access to HKS’s’s full range of bolt on turbo kits, turbo chargers, waste gates, manifolds and accessories. Call or email to enquire…



We have access to TURBOSMART”s full range of world renowned waste gates and blow off valves. Call or email to enquire…


Turbo 6 TIAL JDM

We have access to TIAL”s full range of world renowned waste gates, blow off valves, and stainless V-band turbo housings. Call or email to enquire…

OK, I could go on forever here but the list is endless. There is much more!!!! – email to enquire


Whatever you need, whatever you chasing, whatever tickles your fancy – East Coast Customs can get it for you!!!

oil coolers + relocation kits

Misc 1 oil coolers + relocation kits JDM

shift knobs

Misc shift knobs JDM

short shifters

Misc short shifters JDM

clutches / diffs

Misc clutches diffs JDM

race seats

Misc race seats JDM

EL dials / steering wheels and boss kits

Misc EL dials steering wheels boss kits JDM

custom braided lines / engine and gearbox mounts

Misc fuel pumps injectors fuel regs braided lines engine gearbox mounts JDM

Call or email to enquire…

Do you like what you see?

Contact Us

Need a service, job or mod?

Get A Quote

Share this with your friends

Michael Sanderson said this about East Coast Customs...

"Hi All, (Apologies to all on the long winded testimonial, very hard to put it all into a short spiel) I was introduced to East Coast Customs through a friend of the family who just had his HSV Senator cammed, at the time I was looking for a reputable company to Cam my wife’s 6.2L HSV Clubby and Supercharge my 6.2L HSV GTS. I had been looking around for a while and was given various options and prices to do the work required. I approached East Coast for their advise. Rob spoke to me at length as to options available, I’m not a mechanic so a lot of what Rob initially said went over my head so Rob dumbed it down so I understood. From the moment I made a commitment to have the cars done I have been unbelievably impressed with the service and quality of work provided by East Coast, my car was fitted with the new design Yella Terra 2.9L Blower, Stage 4 cam pack, Twin Plate clutch, Rip Shifter and a variety of other bits and pieces to pull it all together and my wife had a stage 4 Cam pack fitted, the Blower was a headache from the start as far as getting one, Yella Terra to their credit would not release their new model until it was right. Matty kept me informed all the way through the procurement process until he had a confirmed commitment the blower was on the way. As I work close to East Coast I dropped in the first day just to get an update, I was standing at the roller door looking in when Matty said come in we will show you what we are doing, I was somewhat hesitant as most mechanics don’t like you looking over their shoulder. This was the first time I met Ben, Ben is not only part owner he is also the head mechanic (what more could you ask for owners being Mechanics and Dino tuners). Ben talked me through what he is doing and the reasons he was doing it, I learnt more about the dynamics of an engine in one week than I have picked up over my life time. I called in average twice a day to just have a look to see how things were progressing and Rob, Ben, Matty and the team were always pleasant and informative of what they were up to, as this was the first fit up of the new Yella Terra Blower to a HSV there were a few minor issues that Ben needed to overcome, which he did with great results. I can’t stress enough the quality workmanship and service I received from East Coast, as an example, East coast had to remove my exhaust system to replace the clutch, they notice a poor weld job where I had had a hot dog removed from my hurricane exhaust system by a reputable exhaust company (Wasn’t completely welded, they used exhaust silicone to fill up the join) Ben advised they would weld it up before refit. When I returned on another visit the exhaust was in but they were cutting these sections out, I enquired why and Dan advised their weld look terrible as the silicone jammed in the join was causing the weld to splatter, when I spoke to Rob he advised it looked unprofessional and they are replacing both sections with new 3 inch pipe about a metre long each at no charge, they could have just welded the old pipe up and I would have been none the wiser, this is just one of the areas there quality of work and service stands out as a number of them come to light through the week. As they say ‘when you are on a good thing stick to it’ I already have my sons SS booked in next week for an OTR and maffless tune. All I can say is give them a go, you won’t be disappointed. I end here with this one parting comment, tell East Coast what you want and listen to their suggestion, I did and can’t be happier with the results. My wife’s and my car went in with an average of 380hp at the wheels, my wife’s left with a respectable 433hp at the wheels (already had an OTR), mine left with 580hp at the wheels, mine has a lot more to go but we capped it at 580 to protect the standard bottom end and heads. To Rob, Ben , Matty and the boys, with the quality of work and service you provide your business will go far, and congratulations in your new relationship with UPREV Engine Management Solutions in the United States, for UPREV to get on board and East Coast the only Protuner on the East Coast is impressive...."

Read more Testimonials »